How to measure your ring size accurately
How
do I measure ring size? This is perhaps the most commonly asked
question while shopping for rings online. For this reason, we have an
entire section dedicated to guiding you on how to measure your ring
size.
The best way of sizing is to get your finger measured by your local jeweler.
Ring Sizer
In
order to print the ring sizer above, be sure that your printer is set
to 100%. In other words, make sure that you have not reduced the print
size in 'Page Setup'. You can verify that the sizer has printed
correctly by measuring it with a ruler; it should measure from left to
right: 3 3/8 inches.
Once you have printed the sizer, you need to cut it out and then use the following directions to find your ring size:
1. Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
2. With a pen, mark the point on the string where the end meets.
3. Using the chart, place the end of the string on the left hand line
next to the letter "A" and stretch the string along the sizer toward
the numbers.
4. The pen mark on your string should line up with a number to indicate your ring size.
Below is a chart of ring sizes to help customers figure out how to measure ring sizes.
Can my ring be resized?
Yes, we
can complete a resize for you, in order to do this you must return the
ring to us along with your order number and the size you want the ring
changed to. There is a charge of $40 for any resizeing done, this price
includes the return delivery charge.
